Webinars
November 18, 2009Condition Assessment of Force Mains
Wastewater utilities are under increased pressure to inspect and proactively maintain their buried assets. Condition assessment of gravity sewer pipelines has generally become a standard operating procedure for many wastewater utilities while assessment of force mains has remained a challenge. Force mains are often configured such that inspection using conventional methods is not practical or not meaningful as access points are too far apart, lack of redundancy prevents taking the pipe out of service, and the potential problems with pressure pipe may not be identified with conventional methods.
View archived webinar
April 2, 2008
Leak Detection and Condition Assessment of Large Diameter Pipelines.
Utilities are under increased pressure to maintain their buried assets. Large diameter water and wastewater mains are a critical component of the pipeline infrastructure. Given the consequence of failure of large diameter pipelines, it is prudent for a utility to consider a condition assessment program to prioritize rehabilitation and maintenance requirements for these critical pipelines. This webinar will discuss leak detection and condition assessment technologies that have been successfully used for large diameter water and wastewater pressure pipelines.
*Note: To view webinars you require the WebEx Player. When you click on the
"View archived webinar" link above, your browser should ask to install an Active-X control for the WebEx player. Please allow it to install and your webinar will load following completion of the installation.
If the WebEx player does not automatically install you can download it here for free. Save the installer to your desktop. When it has finished downloading double click on it to install the WebEx player. Then click on the "View archived webinar" link above.
